Did you find what you were looking for?

Pigtail Eyebolt – Suspension Bolt

pigtail-eyebolts1

Pigtail eyebolts are threaded at one end for the attachment of an expansion unit. The other end is hot worked to form a pigtail eyebolt for suspension of air, water, refrigeration and ventilation columns as well as for electrical telephone cable and chain type handrails.

They are recommended for the suspension of air, water, refrigeration and ventilation columns, as well as for electrical and telephone cables and chain type handrails.
They are not recommended for heavier duty usage such as snatch block rigging or the support of platforms.

pigtail-eyebolts

LENGTHS

Pigtail eyebolts are available in standard lengths as shown in the table below. Lengths are measured to below the twist.

Type Length I.D. of eye Breaking load (kN) Min
M16 250 64 78.5
380 64 78.5
450 64 78.5
530 64 78.5
M20 450 64 105
530 64 105

Non standard lengths available on request

A cold-rolling process forms all threads.
The pigtail eye is hot formed for better mechanical properties.
The following standard thread types are available: Metric (right hand only) – M16 x 2 – 8g and M20 x 2.5 – 8g.

MECHANICAL PROPERTIES OF RAW MATERIAL

Type Yield strength (MPa) Ultimate Tensile strength (MPa) Elongation (%)
M16 360 (min.) 570 (min.) 22
M20 450 (min.) 600 (min.) 14